Product details

With its long range, the devolo G3-PLC Modem 500k is ideal for smart grid applications as well as M2M communication.

 

  • For smart grid, industrial and commercial applications
  • Use of the mains supply for secure and stable data transmission
  • Impressive range
  • 100% building penetration
  • Optimal network coverage – without repeater
  • High data rate in the 150 to 500 kHz frequency band
  • Time- and cost-efficient integration into your energy network

Technical data

Show technical data

Standards: G3-PLC specification (ITU-T G.9903)

Functionality: Ethernet over G3-PLC, Serial over G3-PLC

Protocols: IPv6, IPv4, IEEE 802.3

Transfer rates (gross): 240 kbps (max D8PSK)

Modulation: Robo,DBPSK, DQPSK, D8PSK (OFDM)

Network characteristics: Dynamic routing mechanism supports mesh networking and automatic connection adjustment for selecting the optimum transmission path. Automatic Repeat Request (ARQ) improves error detection and data reliability

Range: Up to 1,700 m depending on network characteristics and topology

Security: AES 128-bit layer 2

LEDs: Operation indicator, PLC connected/ data transmission, fault indicator

Buttons: Reset / factory default

Frequency band: 150 to 490 kHz

Output power: 100 dBμV/-9 dBm @ 50 ohms

Device connection: RJ45 (Ethernet), RJ12 (serial), screw clamp (mains supply)

Power consumption: 4 W @ 10 kbps bidirectional data communication @ 3 ohms of line impedance

Voltage supply: 230 V AC three-phase / single-phase (internal fuse protection with 50 kA breaking capacity)

PLC coupling: 1 or 3 phases to neutral

Dimensions (in mm): 71 (width) x 100 (45+55) (height) x 75 (depth)

Temperature (Storage / Operation): -25 °C to 70 °C / -25 °C to 55 °C

Ambient conditions: 10 - 90% humidity (non-condensing)

Protection class: IP 30

Approvals: CE Class A (EU, CH, NO)

Scenario: G3-PLC for all smart grid applications

Stable data communication is the basic requirement for a smart low-voltage network. The importance of measuring devices for network status monitoring and network control technology continues to increase and the devices have to be integrated into the smart grid in way that enables communication. G3-PLC uses the existing power line for bidirectional data communication.

 

Older network control technology can also be integrated into the smart grid using the serial port on the G3-PLC modem 500k. This makes G3-PLC the perfect solution for obsolete forms of communication such as analogue telephones or CSD wireless system.

Contact

Would you like to receive further information? We will be happy to answer your questions. You can also schedule a call with us.

More information

Data communication in the distribution grid

Use your power grid as a communication infrastructure for smart grid and smart city applications.

Research & Development

Know-how from various, Europe-wide research projects and field tests: Benefit from our international experience.